Friday, February 13, 2009
Monday, August 4, 2008
Application of statistical methods
Standards and projects under the direct responsibility of Secretariat
Standard and/or project
Current stage
TC
2ISO 2602:1980Statistical interpretation of test results -- Estimation of the mean -- Confidence interval
90.93
TC 69
3ISO 2854:1976Statistical interpretation of data -- Techniques of estimation and tests relating to means and variances
90.93
TC 69
7ISO 2859-1:1999Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.93
TC 69/SC 5
9ISO 2859-1:1999/Cor 1:2001
60.60
TC 69/SC 5
10ISO 2859-2:1985Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
90.92
TC 69/SC 5
11ISO/DIS 2859-2Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limited quality (LQ) for isolated lot inspection
40.60
TC 69/SC 5
12ISO 2859-3:2005Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures
90.20
TC 69/SC 5
15ISO 2859-4:2002Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels
90.93
TC 69/SC 5
16ISO 2859-5:2005Sampling procedures for inspection by attributes -- Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.20
TC 69/SC 5
17ISO 2859-10:2006Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
60.60
TC 69/SC 5
20ISO 3301:1975Statistical interpretation of data -- Comparison of two means in the case of paired observations
90.93
TC 69
21ISO 3494:1976Statistical interpretation of data -- Power of tests relating to means and variances
90.93
TC 69
23ISO 3534-1:2006Statistics -- Vocabulary and symbols -- Part 1: General statistical terms and terms used in probability
60.60
TC 69/SC 1
26ISO 3534-2:2006Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
60.60
TC 69/SC 1
28ISO/NP 3534-3Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
10.99
TC 69/SC 1
29ISO 3534-3:1999Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
90.92
TC 69/SC 1
32ISO 3951-1:2005Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
90.20
TC 69/SC 5
33ISO 3951-2:2006Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
60.60
TC 69/SC 5
34ISO 3951-2:2006/CD Amd 1
30.20
TC 69/SC 5
35ISO 3951-3:2007Sampling procedures for inspection by variables -- Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
60.60
TC 69/SC 5
36ISO/WD 3951-4Sampling procedures for inspection by variables -- Part 4: Procedures for assessment of declared quality levels
20.20
TC 69/SC 5
37ISO 3951-5:2006Sampling procedures for inspection by variables -- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
60.60
TC 69/SC 5
38ISO 5479:1997Statistical interpretation of data -- Tests for departure from the normal distribution
90.93
TC 69
41ISO 5725-1:1994Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
90.93
TC 69/SC 6
42ISO 5725-1:1994/Cor 1:1998
60.60
TC 69/SC 6
43ISO 5725-2:1994Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
90.92
TC 69/SC 6
44ISO 5725-2:1994/Cor 1:2002
60.60
TC 69/SC 6
45ISO 5725-3:1994Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
90.93
TC 69/SC 6
46ISO 5725-3:1994/Cor 1:2001
60.60
TC 69/SC 6
47ISO 5725-4:1994Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
90.93
TC 69/SC 6
48ISO 5725-5:1998Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
90.93
TC 69/SC 6
49ISO 5725-5:1998/Cor 1:2005
60.60
TC 69/SC 6
50ISO 5725-6:1994Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
90.93
TC 69/SC 6
51ISO 5725-6:1994/Cor 1:2001
60.60
TC 69/SC 6
53ISO 7870-1:2007Control charts -- Part 1: General guidelines
60.60
TC 69/SC 4
54ISO/TR 7871:1997Cumulative sum charts -- Guidance on quality control and data analysis using CUSUM techniques
60.60
TC 69/SC 4
55ISO 7873:1993Control charts for arithmetic average with warning limits
90.20
TC 69/SC 4
56ISO 7966:1993Acceptance control charts
90.92
TC 69/SC 4
57ISO 8258:1991Shewhart control charts
90.92
TC 69/SC 4
58ISO 8258:1991/Cor 1:1993
60.60
TC 69/SC 4
60ISO 8422:2006Sequential sampling plans for inspection by attributes
60.60
TC 69/SC 5
62ISO 8423Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
60.00
TC 69/SC 5
63ISO 8423:1991Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
90.92
TC 69/SC 5
64ISO 8423:1991/Cor 1:1993
60.60
TC 69/SC 5
66ISO/TR 8550-1:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 1: Acceptance sampling
60.60
TC 69/SC 5
67ISO/TR 8550-2:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 2: Sampling by attributes
60.60
TC 69/SC 5
68ISO/TR 8550-3:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 3: Sampling by variables
60.60
TC 69/SC 5
71ISO/TR 10017:2003Guidance on statistical techniques for ISO 9001:2000
60.60
TC 176/SC 3
72ISO 10576-1:2003Statistical methods -- Guidelines for the evaluation of conformity with specified requirements -- Part 1: General principles
90.60
TC 69/SC 6
73ISO 10725:2000Acceptance sampling plans and procedures for the inspection of bulk materials
90.93
TC 69
74ISO 11095:1996Linear calibration using reference materials
90.60
TC 69/SC 6
75ISO 11453:1996Statistical interpretation of data -- Tests and confidence intervals relating to proportions
90.93
TC 69
76ISO 11453:1996/Cor 1:1999
60.60
TC 69
77ISO 11462-1:2001Guidelines for implementation of statistical process control (SPC) -- Part 1: Elements of SPC
90.93
TC 69/SC 4
78ISO/CD 11462-2Guidelines for implementation of statistical process control (SPC) -- Part 2: Catalogue of tools and techniques
30.99
TC 69/SC 4
79ISO 11648-1:2003Statistical aspects of sampling from bulk materials -- Part 1: General principles
90.60
TC 69
80ISO 11648-2:2001Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials
90.93
TC 69
81ISO 11843-1:1997Capability of detection -- Part 1: Terms and definitions
90.20
TC 69/SC 6
82ISO 11843-1:1997/Cor 1:2003
60.60
TC 69/SC 6
83ISO 11843-2:2000Capability of detection -- Part 2: Methodology in the linear calibration case
90.93
TC 69/SC 6
84ISO 11843-2:2000/Cor 1:2007
60.60
TC 69/SC 6
85ISO 11843-3:2003Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
90.20
TC 69/SC 6
86ISO 11843-4:2003Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value
60.60
TC 69/SC 6
87ISO 11843-5:2008Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
60.60
TC 69/SC 6
89ISO/TR 13425:2006Guidelines for the selection of statistical methods in standardization and specification
60.60
TC 69
91ISO 13448-1:2005Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 1: Guidelines for the APP approach
90.93
TC 69/SC 5
92ISO 13448-2:2004Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 2: Coordinated single sampling plans for acceptance sampling by attributes
90.93
TC 69/SC 5
93ISO 13528:2005Statistical methods for use in proficiency testing by interlaboratory comparisons
90.20
TC 69/SC 6
94ISO 14560:2004Acceptance sampling procedures by attributes -- Specified quality levels in nonconforming items per million
90.93
TC 69/SC 5
95ISO/DIS 16269-4Statistical interpretation of data -- Part 4: Detection and treatment of outliers
40.20
TC 69
96ISO 16269-6:2005Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals
90.20
TC 69
97ISO 16269-7:2001Statistical interpretation of data -- Part 7: Median -- Estimation and confidence intervals
90.93
TC 69
98ISO 16269-8:2004Statistical interpretation of data -- Part 8: Determination of prediction intervals
90.93
TC 69
99ISO 18414:2006Acceptance sampling procedures by attributes -- Accept-zero sampling system based on credit principle for controlling outgoing quality
60.60
TC 69/SC 5
101ISO/PRF TR 18532Guidance on the application of statistical methods to quality and to industrial standardization
50.00
TC 69
102ISO 21247:2005Combined accept-zero sampling systems and process control procedures for product acceptance
90.20
TC 69/SC 5
103ISO 21747:2006Statistical methods -- Process performance and capability statistics for measured quality characteristics
60.60
TC 69/SC 4
104ISO/DIS 22514-1Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts
40.60
TC 69/SC 4
105ISO 22514-3:2008Statistical methods in process management -- Capability and performance -- Part 3: Machine performance studies for measured data on discrete parts
60.60
TC 69/SC 4
106ISO/TR 22514-4:2007Statistical methods in process management -- Capability and performance -- Part 4: Process capability estimates and performance measures
60.60
TC 69/SC 4
107ISO/TR 22971:2005Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
60.60
TC 69/SC 6
108ISO/DIS 24153Random sampling and randomization procedures
40.60
TC 69/SC 5
109ISO/AWI 27877Concepts of precision and uncertainty for qualitative data
20.00
TC 69/SC 6
110ISO/AWI TS 28037Use of linear calibration curves
20.00
TC 69/SC 6
111ISO/DIS 28640Random variate generation methods
40.20
TC 69
112ISO/CD 28801Sampling by attributes -- Double sampling plans with minimal sample sizes indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
30.99
TC 69/SC 5
113ISO/TR 29901:2007Selected illustrations of full factorial experiments with four factors
60.60
TC 69
more
Standard and/or project
Current stage
TC
2ISO 2602:1980Statistical interpretation of test results -- Estimation of the mean -- Confidence interval
90.93
TC 69
3ISO 2854:1976Statistical interpretation of data -- Techniques of estimation and tests relating to means and variances
90.93
TC 69
7ISO 2859-1:1999Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.93
TC 69/SC 5
9ISO 2859-1:1999/Cor 1:2001
60.60
TC 69/SC 5
10ISO 2859-2:1985Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
90.92
TC 69/SC 5
11ISO/DIS 2859-2Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limited quality (LQ) for isolated lot inspection
40.60
TC 69/SC 5
12ISO 2859-3:2005Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures
90.20
TC 69/SC 5
15ISO 2859-4:2002Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels
90.93
TC 69/SC 5
16ISO 2859-5:2005Sampling procedures for inspection by attributes -- Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.20
TC 69/SC 5
17ISO 2859-10:2006Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
60.60
TC 69/SC 5
20ISO 3301:1975Statistical interpretation of data -- Comparison of two means in the case of paired observations
90.93
TC 69
21ISO 3494:1976Statistical interpretation of data -- Power of tests relating to means and variances
90.93
TC 69
23ISO 3534-1:2006Statistics -- Vocabulary and symbols -- Part 1: General statistical terms and terms used in probability
60.60
TC 69/SC 1
26ISO 3534-2:2006Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
60.60
TC 69/SC 1
28ISO/NP 3534-3Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
10.99
TC 69/SC 1
29ISO 3534-3:1999Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
90.92
TC 69/SC 1
32ISO 3951-1:2005Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
90.20
TC 69/SC 5
33ISO 3951-2:2006Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
60.60
TC 69/SC 5
34ISO 3951-2:2006/CD Amd 1
30.20
TC 69/SC 5
35ISO 3951-3:2007Sampling procedures for inspection by variables -- Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
60.60
TC 69/SC 5
36ISO/WD 3951-4Sampling procedures for inspection by variables -- Part 4: Procedures for assessment of declared quality levels
20.20
TC 69/SC 5
37ISO 3951-5:2006Sampling procedures for inspection by variables -- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
60.60
TC 69/SC 5
38ISO 5479:1997Statistical interpretation of data -- Tests for departure from the normal distribution
90.93
TC 69
41ISO 5725-1:1994Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
90.93
TC 69/SC 6
42ISO 5725-1:1994/Cor 1:1998
60.60
TC 69/SC 6
43ISO 5725-2:1994Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
90.92
TC 69/SC 6
44ISO 5725-2:1994/Cor 1:2002
60.60
TC 69/SC 6
45ISO 5725-3:1994Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
90.93
TC 69/SC 6
46ISO 5725-3:1994/Cor 1:2001
60.60
TC 69/SC 6
47ISO 5725-4:1994Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
90.93
TC 69/SC 6
48ISO 5725-5:1998Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
90.93
TC 69/SC 6
49ISO 5725-5:1998/Cor 1:2005
60.60
TC 69/SC 6
50ISO 5725-6:1994Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
90.93
TC 69/SC 6
51ISO 5725-6:1994/Cor 1:2001
60.60
TC 69/SC 6
53ISO 7870-1:2007Control charts -- Part 1: General guidelines
60.60
TC 69/SC 4
54ISO/TR 7871:1997Cumulative sum charts -- Guidance on quality control and data analysis using CUSUM techniques
60.60
TC 69/SC 4
55ISO 7873:1993Control charts for arithmetic average with warning limits
90.20
TC 69/SC 4
56ISO 7966:1993Acceptance control charts
90.92
TC 69/SC 4
57ISO 8258:1991Shewhart control charts
90.92
TC 69/SC 4
58ISO 8258:1991/Cor 1:1993
60.60
TC 69/SC 4
60ISO 8422:2006Sequential sampling plans for inspection by attributes
60.60
TC 69/SC 5
62ISO 8423Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
60.00
TC 69/SC 5
63ISO 8423:1991Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
90.92
TC 69/SC 5
64ISO 8423:1991/Cor 1:1993
60.60
TC 69/SC 5
66ISO/TR 8550-1:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 1: Acceptance sampling
60.60
TC 69/SC 5
67ISO/TR 8550-2:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 2: Sampling by attributes
60.60
TC 69/SC 5
68ISO/TR 8550-3:2007Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Part 3: Sampling by variables
60.60
TC 69/SC 5
71ISO/TR 10017:2003Guidance on statistical techniques for ISO 9001:2000
60.60
TC 176/SC 3
72ISO 10576-1:2003Statistical methods -- Guidelines for the evaluation of conformity with specified requirements -- Part 1: General principles
90.60
TC 69/SC 6
73ISO 10725:2000Acceptance sampling plans and procedures for the inspection of bulk materials
90.93
TC 69
74ISO 11095:1996Linear calibration using reference materials
90.60
TC 69/SC 6
75ISO 11453:1996Statistical interpretation of data -- Tests and confidence intervals relating to proportions
90.93
TC 69
76ISO 11453:1996/Cor 1:1999
60.60
TC 69
77ISO 11462-1:2001Guidelines for implementation of statistical process control (SPC) -- Part 1: Elements of SPC
90.93
TC 69/SC 4
78ISO/CD 11462-2Guidelines for implementation of statistical process control (SPC) -- Part 2: Catalogue of tools and techniques
30.99
TC 69/SC 4
79ISO 11648-1:2003Statistical aspects of sampling from bulk materials -- Part 1: General principles
90.60
TC 69
80ISO 11648-2:2001Statistical aspects of sampling from bulk materials -- Part 2: Sampling of particulate materials
90.93
TC 69
81ISO 11843-1:1997Capability of detection -- Part 1: Terms and definitions
90.20
TC 69/SC 6
82ISO 11843-1:1997/Cor 1:2003
60.60
TC 69/SC 6
83ISO 11843-2:2000Capability of detection -- Part 2: Methodology in the linear calibration case
90.93
TC 69/SC 6
84ISO 11843-2:2000/Cor 1:2007
60.60
TC 69/SC 6
85ISO 11843-3:2003Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
90.20
TC 69/SC 6
86ISO 11843-4:2003Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value
60.60
TC 69/SC 6
87ISO 11843-5:2008Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
60.60
TC 69/SC 6
89ISO/TR 13425:2006Guidelines for the selection of statistical methods in standardization and specification
60.60
TC 69
91ISO 13448-1:2005Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 1: Guidelines for the APP approach
90.93
TC 69/SC 5
92ISO 13448-2:2004Acceptance sampling procedures based on the allocation of priorities principle (APP) -- Part 2: Coordinated single sampling plans for acceptance sampling by attributes
90.93
TC 69/SC 5
93ISO 13528:2005Statistical methods for use in proficiency testing by interlaboratory comparisons
90.20
TC 69/SC 6
94ISO 14560:2004Acceptance sampling procedures by attributes -- Specified quality levels in nonconforming items per million
90.93
TC 69/SC 5
95ISO/DIS 16269-4Statistical interpretation of data -- Part 4: Detection and treatment of outliers
40.20
TC 69
96ISO 16269-6:2005Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals
90.20
TC 69
97ISO 16269-7:2001Statistical interpretation of data -- Part 7: Median -- Estimation and confidence intervals
90.93
TC 69
98ISO 16269-8:2004Statistical interpretation of data -- Part 8: Determination of prediction intervals
90.93
TC 69
99ISO 18414:2006Acceptance sampling procedures by attributes -- Accept-zero sampling system based on credit principle for controlling outgoing quality
60.60
TC 69/SC 5
101ISO/PRF TR 18532Guidance on the application of statistical methods to quality and to industrial standardization
50.00
TC 69
102ISO 21247:2005Combined accept-zero sampling systems and process control procedures for product acceptance
90.20
TC 69/SC 5
103ISO 21747:2006Statistical methods -- Process performance and capability statistics for measured quality characteristics
60.60
TC 69/SC 4
104ISO/DIS 22514-1Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts
40.60
TC 69/SC 4
105ISO 22514-3:2008Statistical methods in process management -- Capability and performance -- Part 3: Machine performance studies for measured data on discrete parts
60.60
TC 69/SC 4
106ISO/TR 22514-4:2007Statistical methods in process management -- Capability and performance -- Part 4: Process capability estimates and performance measures
60.60
TC 69/SC 4
107ISO/TR 22971:2005Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
60.60
TC 69/SC 6
108ISO/DIS 24153Random sampling and randomization procedures
40.60
TC 69/SC 5
109ISO/AWI 27877Concepts of precision and uncertainty for qualitative data
20.00
TC 69/SC 6
110ISO/AWI TS 28037Use of linear calibration curves
20.00
TC 69/SC 6
111ISO/DIS 28640Random variate generation methods
40.20
TC 69
112ISO/CD 28801Sampling by attributes -- Double sampling plans with minimal sample sizes indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
30.99
TC 69/SC 5
113ISO/TR 29901:2007Selected illustrations of full factorial experiments with four factors
60.60
TC 69
more
Subscribe to:
Posts (Atom)
